MES-Volvox Medium

NOW AVAILABLE

MES-Volvox Medium is now available in larger volumes.

$ 55.00

General purpose medium for freshwater strains, especially those requiring ammonium. Suitable for xenic and axenic cultures. Modified Volvox Medium.

To approximately 950 mL of dH₂O, add each of the components in the order specified (except vitamins) while stirring continuously.
Adjust the pH to 6.7
Bring the total volume to 1 L with dH₂O.
- For 1.5% agar medium add 15 grams of agar into the flask; do not mix.
Cover and autoclave medium.
When cooled, add vitamins.
- For agar medium add vitamins, mix, and dispense before agar solidifies.
Store at refrigerator temperature.

#	Component	Amount	Stock Solution Concentration	Final Concentration Per 1 Liter
1	Ca(NO₃)₂•4H₂O (Sigma C 5676)	1 mL/L	11.8 g/100 mL dH20	0.5 mM
2	MgSO₄•7H₂O (Sigma 230391)	1 mL/L	4 g/100 mL dH20	0.16 mM
3	Na₂glycerophosphate•5H₂O (Sigma G 6501 )	1 mL/L	5 g/100 mL dH20	0.16 mM
4	KCl (Fisher P 217)	1 mL/L	5 g/100 mL dH20	0.67 mM
5	MES (Sigma M-8250)	1.95 g/L		10 mM
6	P-IV Metal Solution	6 mL/L
7	NH₄Cl (Fisher A 649-500)	1 mL/L	2.67 g/100 mL dH20	0.5 mM
8	Vitamin B₁₂	1 mL/L
9	Biotin Vitamin Solution	1 mL/L

Safety Data Sheet (SDS)

The quality of water, including natural seawater, is important. The term 'dH₂O' generally refers to distilled, deionized, distilled/deionized water, Milli-Q water (Millipore Corp.), etc. Natural seawater and natural freshwater should be obtained from a non-polluted source.
When dissolving chemicals, wait for the first component to dissolve before adding the second. Stirring, and sometimes the addition of heat, is often required to dissolve the chemicals efficiently. Preparation of stock solutions for frequently made algal culture media make preparing media convenient but also necessary to avoid errors from weighing very tiny amounts.
Attention should be given to the pH of the final medium. In most cases, if pH adjustment is required, this occurs before sterilization. Please note that autoclaving removes carbon dioxide from media lacking carbonate stabilizing buffers. This would make the medium very alkaline soon after removal from the autoclave. In these cases, you should wait approximately 24 hours for gaseous equilibrium before inoculating the medium.