UTEX sells Waris Medium at 1X concentration only. Stock solutions and individual components for this specific medium are currently not available for purchase.
Waris Medium
| View Media Recipe |
| View Available Downloads |
$ 55.00
Deadline to place an order for Waris Medium with a 2025 shipment date has passed. New orders will not ship until the 2026 new year—see announcement or order confirmation email for your expected shipping date.
Waris Medium
Modification of the original recipe. Suitable for xenic cultures of some desmids.
Directions
For 1 L Total
- To approximately 900 mL of dH2O, add each of the components in the order specified while stirring continuously.
- Adjust the pH to 6.0.
- Bring the total volume to 1 L with dH2O.
- Cover and autoclave medium.
| # | Component | Amount | Stock Solution Concentration | Final Concentration |
|---|---|---|---|---|
| 1 | KNO3 (Baker 3190) |
1 mL/L | 10 g/100 mL dH2O | 0.99 mM |
| 2 | MgSO4•7H2O (Sigma 230391) |
1 mL/L | 2 g/100 mL dH2O | 0.081 mM |
| 3 | (NH4)2HPO4 (Fisher A686) |
1 mL/L | 2 g/100 mL dH2O | 0.151 mM |
| 4 | CaSO4•2H2O (Mallinckroft 4300) |
30 mL/L | 0.2 g/100 mL dH2O | 0.35 mM |
| 5 | P-IV Metal Solution | 6 mL/L |
Important Notes To Consider:
- The quality of water, including natural seawater, is important. The term 'dH2O' generally refers to distilled, deionized, distilled/deionized water, Milli-Q water (Millipore Corp.), etc. Natural seawater and natural freshwater should be obtained from a non-polluted source.
- When dissolving chemicals, wait for the first component to dissolve before adding the second. Stirring, and sometimes the addition of heat, is often required to dissolve the chemicals efficiently. Preparation of stock solutions for frequently made algal culture media make preparing media convenient but also necessary to avoid errors from weighing very tiny amounts.
- Attention should be given to the pH of the final medium. In most cases, if pH adjustment is required, this occurs before sterilization. Please note that autoclaving removes carbon dioxide from media lacking carbonate stabilizing buffers. This would make the medium very alkaline soon after removal from the autoclave. In these cases, you should wait approximately 24 hours for gaseous equilibrium before inoculating the medium.
Additional algal culture media recipes can be found at the following other major Collections' websites:
- Culture Collection of Algae and Protozoa (CCAP)
- National Center for Marine Algae and Microbiota (NCMA)
- National Institute for Environmental Studies (NIES) Microbial Culture Collection
- The Pasteur Culture Collection of Cyanobacteria (PCC)
- The Culture Collection of Algae at Goettingen University (SAG)
- Canadian Phycological Culture Centre (CPCC)
Follow UTEX
All UTEX images are licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
